Домофони
Кнопковий модуль виклику 4-м System 106, сталь V4A
System 106 call-button module stainless steel V4A 4-gang - Easy-to-use, vandal-proof, and scratch-resistant call buttons. - Function changes, e.g from 2-gang to 4-gang, can be easily implemented by replacing the buttons. - Various inscription options possible. Professional inscription by the Gira inscription service{b}www.beschriftung.gira.de{b}.
Кольорова камера TX_44, алюміній
Colour camera for door station colour aluminium - Expansion of door stations by a colour camera with automatic day or night switching. - LEDs ensure steady illumination of the field of view at close proximity in night mode. - Camera can be manually pivoted 20° horizontally and vertically. In combination with the wide-angle lens, a very wide field of view of the door entry area results. - Automatic background lighting compensation. - Automatic white balance. - Automatic gain control (AGC). - Integrated temperature-dependent camera heating. - Sprayed-water proof cover plate. - Camera cover plate made of impact-resistant plastic. Easy to replace if damaged, e.g. due to vandalism. The colour camera may not be positioned directly beneath a light. Suitable for use in the Gira energy profile. {b}Not{b}Suitable for use in the Gira energy profile with light.
Кольорова камера TX_44, антрацит
Colour camera for door station anthracite - Expansion of door stations by a colour camera with automatic day or night switching. - LEDs ensure steady illumination of the field of view at close proximity in night mode. - Camera can be manually pivoted 20° horizontally and vertically. In combination with the wide-angle lens, a very wide field of view of the door entry area results. - Automatic background lighting compensation. - Automatic white balance. - Automatic gain control (AGC). - Integrated temperature-dependent camera heating. - Sprayed-water proof cover plate. - Camera cover plate made of impact-resistant plastic. Easy to replace if damaged, e.g. due to vandalism. The colour camera may not be positioned directly beneath a light. Suitable for use in the Gira energy profile. {b}Not{b}Suitable for use in the Gira energy profile with light.
Кольорова камера TX_44, білий
Colour camera for door station pure white - Expansion of door stations by a colour camera with automatic day or night switching. - LEDs ensure steady illumination of the field of view at close proximity in night mode. - Camera can be manually pivoted 20° horizontally and vertically. In combination with the wide-angle lens, a very wide field of view of the door entry area results. - Automatic background lighting compensation. - Automatic white balance. - Automatic gain control (AGC). - Integrated temperature-dependent camera heating. - Sprayed-water proof cover plate. - Camera cover plate made of impact-resistant plastic. Easy to replace if damaged, e.g. due to vandalism. The colour camera may not be positioned directly beneath a light. Suitable for use in the Gira energy profile. {b}Not{b}Suitable for use in the Gira energy profile with light.
Коммутатор виконавчий 10А
DCS switching actuator - Switching actuator for switching light, controlling a door opener on back/side doors or other functions using the Gira door communication bus. - Actuation of a zero-voltage switching contact 230 V / 10 A via the 2-wire bus. - The switching actuator can be actuated by:the “Door” and “Light” buttons on the home station,the call button on the door station,the call button on the home station. - The switching actuator can be used in five different operating modes: switching, timer/sec., timer/min., pulse, and door opener. - Impulse function for controlling existing automatic staircase mechanisms. - Binary input for switching functions via a connected mechanical push button. - Switching time can be adjusted progressively from 1 to 10 s or 1 to 10 min., depending on the function set. The switching actuator is intended to be installed in the sub-distribution. If this is not possible, use a standard surface-mounted distributor. This component enables door communication systems with more than 30 devices to be set up.
Комплект з’єднувальних кабелів аудіо відео
Set of audio/video connection cables 50 cm - Set of 6-pole audio connection cable and 2-pole video connection cable for remote operation of the colour camera. The cable set is required if the colour camera is to be installed at a distance from the door station or the built-in speaker, or if several empty units must be bridged between the colour camera and the door station (bus coupler) during installation in the Gira energy profile.
Контроллер АУДІО
Audio control device - Control device to supply power to the audio components of the Gira door communication bus. - Power supply of the reverse-polarity protected and short-circuit-proof 2-wire bus. - Self-resetting electronic short-circuit and overload recognition of the operating voltage and the bus connection. - Buttons for system and door opener programming. - LED status indicators for operation, overload, system programming, and door opener programming. - Output AC 12 V for power supply of a standard door opener. - Relay output for switching a door opener with its own power supply. - Door opener time progressively adjustable from 1 to 10 s. The audio control device is intended to be installed in the sub-distribution. If this is not possible, use a standard surface-mounted distributor. This component enables door communication systems with up to 70 devices to be set up (e.g. 1 x built-in speaker, 5 x add-on modules for built-in speakers, 68 x surface-mounted home stations).
Контроллер ВІДЕО
Video control device - Control device for supplying power to the audio and video components of the Gira door communication bus. - Power supply to the reverse-polarity protected, short-circuit-proof 2-wire bus when using video components such as a colour camera and/or TFT colour display. - The video control device can supply power to up to 2 door stations with a colour camera and 28 home stations with TFT colour display. - A total of up to 15 colour cameras can be activated by the video control device (5 door stations video and 10 DCS-camera-gateways), of which two door stations with colour camera can be supplied with power by the video control device. The other colour cameras must each be operated with their own power supply for door communication. - Self-resetting electronic short-circuit and overload recognition of the operating voltage and the bus connection. - Buttons for system and door opener programming. - LED status indicators for operation, overload, system programming, and door opener programming. - Output AC 12 V for power supply of a standard door opener. - Relay output for switching a door opener with its own power supply. - Door opener time progressively adjustable from 1 to 10 s. The video control device is intended for installation in the sub-distribution system, not for standard surface-mounted distributors. When the topology of the video cabling is designed as a branch line, the video distributor is also required. The video control device enables door communication systems with up to 70 audio devices to be set up (e.g. 1 x built-in speaker, 5 x add-on modules for built-in speakers, 68 x surface-mounted home stations).
